|
Double Glazed Casement Windows
All upvc manufacturing is fully certified to the requirements
of ISO 9002, BS 7412 and BS 7950 (formerly pas-011) and all glass
and glazing is in accordance with the requirements of building regulations
parts B, F, L1 & N & BS 6206.
All measurements are in millimetres, mm. To convert to inches divide
by 25.40.
Standard Specifications for Double Glazed Casement Windows
- 70mm main frame depth
- Welded joints
- Stainless steel friction hinges
- Internally glazed
- 28mm low emissivity 'k' glass sealed units with silver spacer
bars
- Double weather seals
- Black gaskets
- Bevelled casements
- Scotia beading
- Concealed drainage
- Steel reinforced sections
- all transoms, mullions & vent sections over 800mm
- outer frames according to size & wind loading
- White finish
- Key operated push button handles - white as standard
- Security espagnolette rod locking - right hand handles fitted
to top vents unless otherwise specified
Options for Double Glazed Casement Windows
- Tilt & turn - open in only, tilt in from top or hinged in from
side
- Authentic run-through sash horns - available on rehau 60mm tritec
profile
- Dual white/mahogany woodgrain finish
- Golden oak woodgrain finish
- Mahogany woodgrain finish
- Any ral colour finish
- All non-white finishes fully reinforced (expansion co-efficient)
- Gold or bronze spacer bars
- White or gold handles
- White gaskets
- Fire escape hinges
- High security hinges
- Easy clean hinges
- Restrictor hinges (limited opening)
- Shoot bolt locking
- Child restrictors (supplementary face fixed)
- Trim vents (permanent ventilators)
- False transoms or mullions (within openers)
- Dummy sashes (fixed lights made as sash for equal sight lines)
- Full range of patterned & tinted pilkington glass
- Full range of leaded light, georgian bar & stained effect glass
Nb: not all options are compatible - please
check
Minimum & Maximum Sizes for Double Glazed Casement Windows
- Maximum size top hung opener 1250mm x 1250mm
- Minimum transom drop 350mm
- Maximum size side hung opener 650mm width x 1250 height
- Tilt & turn opener minimum size 424mm width x 604mm height
- Tilt & turn opener maximum size 1694mm width x 2504mm height
- Tilt & turn opener width not to exceed 1.5 times height
In line with the Company's policy of continuous product development
and improvement, the Company reserves the right to alterations to
any of the specifications contained herein without notice unreservedly.
|
